為啥玻璃廠都搶著上大型中空玻璃生產線？4個核心原因太戳心！

　　Why are glass factories rushing to install large insulated glass production lines? Four core reasons are too heart wrenching!

　　最近跟不少玻璃廠老板聊天，發現大家都在糾結“要不要上大型中空玻璃生產線”。其實這根本不是跟風，而是這臺設備實實在在戳中了玻璃廠的核心痛點——產能、人工、品質、市場，每一點都能幫老板們多賺錢！今天就把話說透，為啥越來越多廠搶著上，看完你就明白這錢花得值不值！

　　Recently, I have been chatting with many glass factory owners and found that everyone is struggling with whether to go to a large insulated glass production line. In fact, this is not simply following the trend, but this equipment has truly hit the core pain points of glass factories - production capacity, labor, quality, and market. Each point can help bosses make more money! Today, let me explain why more and more factories are rushing to join. After reading this, you will understand whether the money is worth it or not!

　　先說說最讓老板們上頭的——產能直接“開掛”，趕單再也不用愁！咱玻璃廠都懂，遇到幕墻工程、批量家裝這種大訂單，普通生產線真是有心無力：單班頂多做幾百平，工人通宵熬夜趕工，累得夠嗆還容易出品質問題，交期還不一定能守住。但大型中空玻璃生產線不一樣，全自動化流程太頂用了：機械臂自動上料、連續合片不耽誤、同步封膠不停歇，單班產能輕松破千平！以前要加班兩三天的訂單，現在一天就能搞定，交期穩了，客戶也愿意多下單，訂單量直接往上沖。

　　First, let's talk about the most frustrating thing for bosses - the direct increase in production capacity, so you no longer have to worry about rushing orders! We all understand in glass factories that when it comes to large orders such as curtain wall engineering and bulk home decoration, ordinary production lines are really powerless: a single shift can only produce a few hundred square meters, workers stay up all night to rush to work, they are exhausted and prone to quality problems, and delivery times may not be guaranteed. But the large-scale insulated glass production line is different. The fully automated process is too advanced: the robotic arm automatically loads the material, continuous lamination does not delay, synchronous sealing does not stop, and the single shift production capacity easily breaks through thousands of square meters! Orders that used to require two or three days of overtime can now be completed in one day, with stable delivery times and customers willing to place more orders, resulting in a direct increase in order volume.

　　第二點，省人工還減損耗，成本降得太實在！以前做大型中空玻璃，最費的就是人力——一塊大玻璃得3個人抬著搬，稍不留神就磕碎，損耗率高得心疼；涂膠、合片全靠工人經驗，反復調整不說，丁基膠、密封膠浪費得厲害。現在大型線全靠機械臂精準抓取，零磕碰、零失誤，不用再靠人扛肩挑，直接能省5-8個人工名額，一年下來人工成本省不少；而且數控系統把控涂膠量、合片精度，膠材浪費少了，玻璃損耗也降了，長期算下來真是太劃算！

　　The second point is to save labor and reduce losses, and the cost reduction is too substantial! In the past, when making large insulated glass, the most labor-intensive task was labor - three people had to lift and move a large piece of glass, which could be easily broken if not careful, resulting in a high loss rate that was heart wrenching; The application of glue and lamination rely entirely on the experience of workers, and not to mention repeated adjustments, the waste of butyl glue and sealant is significant. Nowadays, large-scale production lines rely entirely on robotic arms for precise grasping, with zero collisions and errors. There is no need for people to shoulder and carry them, which can directly save 5-8 labor positions and significantly reduce labor costs over the course of a year; Moreover, the CNC system controls the amount of glue applied and the precision of lamination, reducing the waste of glue materials and glass loss. In the long run, it is really cost-effective!

　　第三點，能做“大尺寸玻璃”，直接抓牢高端市場！現在市場變了，幕墻、寫字樓落地窗、別墅大玻璃的需求越來越多，很多都是3米以上的大尺寸中空玻璃。普通設備根本扛不住，要么切不了寬幅玻璃，要么合片歪歪扭扭，封膠也不穩定，高端訂單想接都接不了。但大型中空玻璃生產線就是專門為大尺寸設計的，從切割、清洗到合片、封膠，全程穩定作業，別人做不了的訂單你能接，高端市場的高利潤直接攥在手里，比在低端市場卷價格香多了！

　　Thirdly, being able to produce "large-sized glass" can directly capture the high-end market! Now the market has changed. There is an increasing demand for curtain walls, french window in office buildings, and large glass in villas, many of which are large size insulating glass with a height of more than 3 meters. Ordinary equipment simply cannot withstand it, either it cannot cut wide glass, or the splicing is crooked and twisted, and the sealing is unstable. It cannot even accept high-end orders. But large-scale insulated glass production lines are specifically designed for large sizes, from cutting and cleaning to laminating and sealing, with stable operations throughout the entire process. You can take orders that others cannot do, and the high profits in the high-end market are directly in your hands, much more expensive than in the low-end market!

　　第四點，品質超穩定，返工率近乎零！中空玻璃最怕啥？漏風漏水、保溫性差，最后返工賠錢還砸口碑。以前靠人工合片，誤差大不說，涂膠還容易不均、帶氣泡，后期出問題是常事。大型線全靠數控定位，合片誤差≤1mm，比指甲蓋還小，膠線均勻得像尺子量過，沒有氣泡沒有斷點，密封性能、保溫性都達標。客戶驗收一次就能過，不用再花時間修修補補，返工率幾乎為零，既省了返工成本，又保住了廠子的口碑，真是一舉兩得。

　　The fourth point is that the quality is extremely stable and the rework rate is almost zero! What is the biggest fear of insulated glass? Leakage of air and water, poor insulation, and ultimately rework, resulting in losses and damaging reputation. Previously, manual lamination was relied upon, resulting in significant errors and uneven coating with bubbles, which were common issues in the later stages. The large-scale production line relies entirely on CNC positioning, with a joint error of ≤ 1mm, smaller than a fingernail cover. The glue line is evenly measured like a ruler, without bubbles or breaks, and the sealing performance and insulation meet the standards. Customers can pass the inspection once, without having to spend time repairing and repairing. The rework rate is almost zero, saving rework costs and maintaining the reputation of the factory. It's really a win-win situation.

　　其實玻璃廠選設備，本質就是看“能不能幫自己賺錢”。大型中空玻璃生產線不僅解決了產能焦慮，讓你趕單不慌；還能省人工、減損耗，降低運營成本；更能幫你拿下大尺寸高端訂單，賺更多利潤；最后還能穩住品質，少操心返工的事。這4個核心原因，每一個都戳中了老板們的痛點，難怪大家都搶著上！

　　In fact, when choosing equipment for a glass factory, the essence is to see if it can help oneself make money. The large-scale insulated glass production line not only solves production capacity anxiety, but also allows you to rush orders without panic; It can also save labor, reduce losses, and lower operating costs; Can better help you secure large-sized high-end orders and earn more profits; Finally, we can maintain the quality and avoid worrying about rework. These 4 core reasons, each of which hits a pain point for bosses, no wonder everyone is rushing to join!

　　現在玻璃行業競爭這么卷，光靠拼價格沒用，得靠設備升級搶市場、降成本。大型中空玻璃生產線不是“奢侈品”，而是幫你提升競爭力的“必需品”。想看看它實際怎么高效作業？可以看看廠家的實拍視頻，機械臂上料、連續合片、精準封膠，每一步都絲滑又高效。如果你的廠也想擴產能、省成本、抓高端單，這臺設備絕對值得重點考慮！

　　The competition in the glass industry is so fierce now, relying solely on price competition is useless. We have to rely on equipment upgrades to grab the market and reduce costs. A large-scale insulated glass production line is not a luxury item, but a necessity to help you enhance your competitiveness. Want to see how it actually works efficiently? You can watch the manufacturer's live action videos, where the robotic arm is used for feeding, continuous lamination, and precise sealing, each step is smooth and efficient. If your factory also wants to expand production capacity, save costs, and capture high-end orders, this equipment is definitely worth considering!

　　本文由  中空玻璃生產線 友情奉獻.更多有關的知識請點擊  http://www.bjrcc.com.cn/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the insulating glass production line For more related knowledge, please click http://www.bjrcc.com.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.