在日常運用中，同步帶會有許多毛病。為了趕快避免這些毛病，并在毛病發作之前避免它們發作，相關研究人員總結了幾種同步帶的毛病防備措施。
In daily use, the synchronous belt will have many problems. To avoid these problems quickly and to avoid them before they occur, researchers have summarized several preventive measures for synchronous belt defects.
1、設備時應首要調整預緊力。假如預緊力不夠大，同步帶的傳動才干會大大降低，皮帶輪也會急劇升溫，磨損附件。相反，假如預緊力太高，同步帶的運用壽命將會縮短。因而，正確合理的預緊力是保證同步正常作業的條件。
1, equipment should first adjust the pre tightening force. If the pre-tightening force is not large enough, the transmission ability of the synchronous belt will be greatly reduced, the pulley will also rise rapidly, wearing accessories. Conversely, if the pre tightening force is too high, the service life of the synchronous belt will be shortened. Therefore, correct and reasonable preload is the guarantee for synchronous normal operation.
2、因為同步帶的張力跟著作業時間的延伸而改變，操作員需求定時調整同步帶的張力。張力的量能夠經過張力計丈量，優選每月一次。
2. Because the tension of the synchronous belt changes with the extension of the operation time, the operator needs to adjust the tension of the synchronous belt regularly. The amount of tension can be measured through a tension meter, preferably once a month.
3、滑輪設備精度應得到操控。事實證明，非平行蒙皮同步帶輪兩邊的應力不均勻，邊際簡單磨損。因而，在設備或替換同步帶時，有必要重復調整兩個皮帶輪，以保證它們平行，并進行試運轉。假如貨物在傳輸過程中沒有違背，這意味著滑輪組件合格。
3, the accuracy of pulley equipment should be controlled. It has been proved that the stress on the two sides of the non parallel skin belt pulley is uneven and the edges are simply worn. Therefore, it is necessary to re-adjust the two pulleys in order to ensure that the two pulleys are parallel and run in trial when the equipment or the synchronous belt is replaced. If the goods are not violated in the transmission process, this means that the pulley components are qualified.

4、在人性化操作方面，有必要加強和標準操作和辦理。制造商應該招聘一些人才，或者在工人上崗前對他們進行一致嚴格的訓練，標準操作人員的操作方法，并加強辦理評價。只要這樣，才干保證安全生產。
4, in terms of humanized operation, it is necessary to strengthen and standard operation and management. Manufacturers should recruit professionals, or train workers consistently and rigorously before they go to work, standardize the way they operate, and strengthen management and evaluation. Only by doing so can we ensure safety in production.
5 、定時整理和保護設備和設備，查看同步帶和同步帶輪的運行狀況，并及時調整或替換。調查和保護周期一般為15天。
5. Timely arrangement and protection of equipment and equipment, check the running status of synchronous belt and synchronous pulley, and timely adjustment or replacement. The investigation and protection period is usually 15 days.
濟南昌盛機械,對雙組份打膠機感興趣的朋友可以關注我們http://linshi.jncsjx.com，敬請期待更多精彩內容）
(Jinan Changsheng Machinery, friends interested in the two-component glue beater can pay attention to our http://linshi.jncsjx.com, please look forward to more exciting content)