The main differences between the integrated bending aluminum strip and the angled splicing aluminum strip are reflected in the following two aspects:

外觀：一體折彎鋁條在折彎處呈光滑的弧形，整體看起來更加流暢、美觀。而插角拼接鋁條則在接口處有明顯的拼接痕跡，線條相對較硬，視覺上可能沒有一體折彎鋁條那么美觀。

Appearance: The integrated bent aluminum strip forms a smooth arc at the bending point, making the overall appearance smoother and more beautiful. However, the corner spliced aluminum strip has obvious stitching marks at the interface, and the lines are relatively hard, which may not be as visually pleasing as the integrated bent aluminum strip.

密封性：插角拼接鋁條在四個角落使用插角進行拼接固定，再用密封膠進行密封處理。而一體折彎鋁條則是通過一次性折彎成型，沒有接口和拼接，因此理論上其密封性可能稍優(yōu)于插角拼接鋁條。不過在實際應用中，中空玻璃的密封性能主要依賴于一道密封膠和二道密封膠，鋁條起到的決定因素其實占比不大，所以對于密封性的影響并不是主要因素。

Sealing performance: The aluminum strips are spliced and fixed at four corners using corner inserts, and then sealed with sealant. And the integrated bending aluminum strip is formed through one-time bending, without interfaces and splicing, so theoretically its sealing performance may be slightly better than that of the angle splicing aluminum strip. However, in practical applications, the sealing performance of insulating glass mainly depends on one layer of sealant and two layers of sealant, and the decisive factor played by aluminum strips is not a major factor, so the impact on sealing performance is not the main factor.

總體來說，如果對于中空玻璃的密封性能沒有特別的要求，兩種鋁條在功能上基本沒有差別；而在視覺外觀上，一體折彎鋁條則更具優(yōu)勢。具體選擇哪種鋁條，需要根據(jù)實際需求和預算來決定。

Overall, if there are no special requirements for the sealing performance of insulating glass, there is basically no difference in functionality between the two types of aluminum strips; In terms of visual appearance, the integrated bent aluminum strip has more advantages. 

本文由中空玻璃丁基膠涂布機為您提供，我們的網(wǎng)站是:http://www.bjrcc.com.cn我們將以全心全意的熱情為您提供服務，歡迎您的訪問！

This article is provided by a butyl adhesive coating machine for insulating glass. Our website is: http://www.bjrcc.com.cn We will provide you with wholehearted enthusiasm and welcome your visit!