其實，中空玻璃加工設備在使用中的保養非常簡單，主要是保持滑輪各方面的潤滑，保持電壓的穩定，防止電器的燒毀。為保證機器的良好運行，應加強機器日常維護與保養，在運行過程中若有異常情況應立即停車檢查。排除故障后再重新啟動。設備出現較大的的故障時應有專業人士來維修，在開始檢修前切記要關掉總電源。

In fact, the maintenance of hollow glass processing equipment during use is very simple, mainly to maintain lubrication in all aspects of the pulleys, maintain voltage stability, and prevent electrical burning. To ensure the good operation of the machine, daily maintenance and upkeep should be strengthened. If there are any abnormal situations during operation, the machine should be stopped immediately for inspection. After troubleshooting, restart. When there is a major malfunction in the equipment, it should be repaired by professionals. Before starting maintenance, be sure to turn off the main power supply.

傳動維護：各傳送輥軸承、毛刷輥軸承、傳送軸承、鏈輪、齒輪定期加注鈣基潤滑脂；微型擺線針輪減速機每半年加鈣基潤滑脂一次；無級調速器在運轉過程中應時常檢查其油位，定期更換潤滑油，保持油位在滑標中心線以上。

Transmission maintenance: Regularly add calcium based lubricating grease to the bearings of each conveyor roller, brush roller, conveyor bearing, sprocket, and gear; Add calcium based grease to the micro cycloidal gear reducer every six months; During the operation of the stepless speed controller, its oil level should be checked regularly, lubricating oil should be replaced regularly, and the oil level should be maintained above the centerline of the sliding mark.

水路維護：水箱內循環水應每天更換，水箱每周清洗一次，經常檢查噴水嘴噴水情況，若發現堵塞應及時清理。

Waterway maintenance: The circulating water in the water tank should be replaced daily, and the water tank should be cleaned once a week. The water spray nozzle should be checked regularly for water spraying. If blockage is found, it should be cleaned in a timely manner.

風路維護：定期檢查風機運行情況，如有異常聲音應立即停機檢查，定期清洗風機過濾柵，減小引風阻力，提高風干后玻璃表面潔凈度。

Wind path maintenance: Regularly check the operation of the fan. If there is any abnormal sound, stop the machine immediately for inspection. Regularly clean the fan filter screen to reduce the induced air resistance and improve the cleanliness of the glass surface after air drying.

本文由中空玻璃加工設備提供技術支持，更多的詳細精彩內容請點擊我們的網站 http://www.bjrcc.com.cn，我們將會全心全意為您提供滿意的服務。

This article provides technical support from insulated glass processing equipment. For more detailed and exciting content, please click on our website http://www.bjrcc.com.cn We will wholeheartedly provide you with satisfactory service.