中空玻璃在調試設備的時候充氣線和封膠線是按照什么的原理調？充氣線做一塊玻璃，然后封膠線去打完，不是封膠線打球的速度越快越好。

What is the principle for adjusting the inflation line and sealing line of insulated glass during equipment debugging? Make a piece of glass with an inflatable line, and then use the sealing line to finish it. The faster the sealing line plays, the better.

因?yàn)楹筮呎麄€(gè)供膠系統分為什么？這個是一次供膠，它的目的是攻到增壓缸里邊，增壓缸這里邊屬于二次供膠，二次供膠的時候?qū)嶋H上就是打膠的時候。

Because what is the entire glue supply system behind it? This is a one-time glue supply, and its purpose is to attack the inside of the booster cylinder. This side of the booster cylinder belongs to the secondary glue supply, and the secondary glue supply is actually during the glue application.

但是當一次供膠供完了，它的壓力假如正常情況下是15，但是可以看一下智能壓力表，隨著時間的變化，它的壓力肯定會慢慢的往下掉。因?yàn)檎麄€(gè)管路的系統不可能打到100%的密封，這個是絕對不可能實現的。

But when the glue supply is completed, if the pressure is normally 15, you can take a look at the smart pressure gauge. With the change of time, its pressure will definitely slowly decrease. Because the entire pipeline system cannot achieve 100% sealing, this is absolutely impossible to achieve.

所以再等個兩三分鐘的時候，有可能在打第一邊的過程，在增加的過程當中壓力會小一點，所以飽和度會小一點。所以這個地方一定要找準原因，分析好它真正的內部因素。

So when we wait for another two or three minutes, it is possible that during the process of hitting the first side, the pressure will decrease slightly during the increase, so the saturation will be slightly lower. So this place must identify the cause and analyze its true internal factors.

所以在保證這個問題的情況下，所有的管路密封一定要做好，不要有很多泄露的地方。再一個就是包括針閥的動作，時間長了以后保養，中間可以搞上點油，檢查，維護。

So, while ensuring this issue, all pipeline seals must be done well and there should be no many leaks. Another thing is to include the action of the needle valve. After a long time, maintenance can be carried out, and some oil can be added in the middle for inspection and maintenance.

本文由全自動鋁條折彎?rùn)C(jī)友情奉獻.更多有關的知識請點擊: http://www.bjrcc.com.cn真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is a friendly contribution from the fully automatic aluminum bar bending machine. For more related knowledge, please click: http://www.bjrcc.com.cn Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned