雙組份打膠機在使用的時候一般按照膠水的性能能夠劃分為單組份中空玻璃打膠機和雙組份中空玻璃打膠機，我們先來說說看單份打膠機，這一種打膠機是比較簡單的一種設備，使用的過程中相對簡單，只需要使用一個壓盤將膠水抽出來到一定的分量然后打進產品里面就可以了。

　　A two-component glue machine when used in accordance with the general performance of the glue can be divided into single hollow glass glue machine and two-component hollow glass glue machine, we are said to see a single rent glue machine, this kind of glue machine is a kind of relatively simple equipment, the use of the process relatively simple, only need to use a platen glue out to a certain component and then into the products inside it.

　　中空玻璃打膠機在進行使用的時候是有的常用膠水的，但是膠水的使用也是要根據不同的情況來選擇的，我們常常看見的有硅酮膠，還有玻璃膠，以及硅膠等等。

　　When the hollow glass glue machine is being used, there are usually professional glue, but the use of glue should be chosen according to different situations. We often see silicone glue, glass glue and silica gel.

　　一般在日常使用的時候都是使用灌膠機將膠水直接注入到兩個不同的料缸里面，然后要經過一定的配比才能夠使用，需要通過定量泵的配比，然后經過混合和定量以后，在使用中空玻璃打膠機注入到產品里面，但是因為一般中空玻璃打膠機所使用的膠水都是一些粘度非常大的膠水，所以操作的時候要求也是非常的高的，并且還非常的困難，所以在使用的時候中空玻璃打膠機的操作和一般的打膠機是不一樣的。

　　General in daily use are the use of glue machine glue will be directly injected into two different cylinder inside, and then to go through with a certain Bizet can be used to pump through the quantitative proportion, then mixed and quantitative, in the use of hollow glass glue injection machine to the product, but because hollow glass glue machine used glue are some glue viscosity is very large, so when the operation requirements are very high, and it is also very difficult, so when in use, the hollow glass glue machine operation and a glue machine is not the same.

　　中空玻璃打膠機在進行工作的時候大多都是按照客戶提供的打膠桶的規格來進行操作，并且量身定制壓盤等等，在打膠的時候通過壓盤來壓膠，在壓盤上面還設置有活塞泵和齒輪泵，這些都是在為了抽膠做準備，客戶在使用的時候只需要將膠桶放在壓盤機上面就行了。

　　Hollow glass glue machine in the work are the specifications of glue barrel provide according to the customer to operate, and tailored plate and so on, when the glue through the platen pressure glue, gear pump and piston pump is also arranged on the pressure plate above, these are all in order to prepare for the pumping. Customers only need to be in the use of the plastic barrel on the pressure plate above the machine.

　　還有一種是雙組份打膠機，這個原理和我們知道的雙液點膠機是差不多的，在進行工作的時候可以按照客戶的要求量身定制壓盤，壓盤需要兩個，然后將已經準備好的膠桶放在兩個定制的壓盤下面，而且經過壓盤壓膠以后在使用定量泵進行配比和混合，全部完成了以后在將膠打入到產品里面。

　　There is a two-component glue machine, double liquid dispensing and we know this principle is almost the same, while working in accordance with the requirements of customers customized needs two pressure plate pressure plate, plastic barrel, and then will be ready on the platen two customized surface, and after the pressure plate pressure glue and mix in the use of quantitative pump, completed after the glue into the product inside.

　　本文的精彩內容來自雙組份打膠機詳細內容請點擊我們的官方網站:http://www.bjrcc.com.cn謝謝您的到來!

　　The wonderful content of this article comes from the detailed content of the double component glue machine, please click on our official website: http://www.bjrcc.com.cn thank you for your arrival!