中空玻璃設備指的是機械設備用于生產和過程中空玻璃。在使用的過程中,中空玻璃設備將不斷地磨損。根據磨損的原因,它可以分為兩類:使用磨損和自然磨損。
　　Insulating glass equipment refers to the mechanical equipment used in the production and process of insulating glass. In the process of using, the insulating glass equipment will be constantly worn. According to the causes of wear, it can be divided into two categories: use wear and natural wear.
　　中空玻璃設備在使用中保養非常簡單，主要是維護滑輪在各個方面的潤滑，保持電壓的穩定，防止電器燒壞。
　　The maintenance of insulating glass equipment in use is very simple, mainly to maintain the lubrication of pulley in all aspects, maintain the stability of voltage, and prevent electrical appliances from burning out.
　　為了保證機器的良好運行，應加強對機器的日常維護和保養。故障排除后重新啟動。當設備出現重大故障時，應由人員進行維修。在開始維修前不要關閉主電源。

　　In order to ensure the good operation of the machine, we should strengthen the daily maintenance of the machine. Restart after troubleshooting. In case of major failure of the equipment, it shall be repaired by professional personnel. Do not turn off the main power supply before starting maintenance.
　　1. 傳輸維護:
　　1. Transmission maintenance:
　　各傳動滾子軸承、毛刷滾子軸承、傳動軸承、鏈輪輪及齒輪均定期注滿鈣基潤滑脂;微型擺線針輪減速器每半年加鈣脂一次;無級調速器每6個月更換一次Ub - l或Ub - 3潤滑油，運行中應經常檢查油位，使油位保持在滑塊中心線以上。
　　All transmission roller bearings, brush roller bearings, transmission bearings, sprocket wheels and gears are regularly filled with calcium grease; the micro cycloidal pin wheel reducer is filled with calcium grease once every six months; the stepless governor is replaced with ub-l or ub-3 lubricating oil once every six months, and the oil level should be checked frequently during operation to keep the oil level above the center line of the slider.
　　2. 航道維護:
　　2. Channel maintenance:
　　水箱內的循環水應每天更換，水箱應每周清洗一次，噴頭應定期檢查。
　　The circulating water in the water tank shall be replaced every day, the water tank shall be cleaned once a week, and the nozzle shall be checked regularly.
　　3.風道路養護:
　　3. wind road maintenance:
　　定期檢查風機運行情況。如有異常聲音，應立即停機檢查。定期清洗風機濾網，降低風阻，提高玻璃表面風干后的清潔度。
　　Check the operation of the fan regularly. If there is any abnormal sound, stop the machine immediately for inspection. Clean the filter screen of the fan regularly to reduce the wind resistance and improve the cleanness of the glass surface after air drying.
　　以上就是雙組份打膠機對中空玻璃設備維護措施的詳細介紹，想要了解更多請點擊官網http://www.bjrcc.com.cn
　　The above is a detailed introduction to the maintenance measures of the insulating glass equipment of the two-component gluing machine. For more information, please click http://www.bjrcc.com.cn