一般情況下出現雙組份打膠機打膠不飽滿的問題大多數是由于人為原因導致的，當然有設備的原因只是出現的概率相對較低。我們說說人為原因導致的這種情況都有哪些。一種情況是由于我們將打膠機的打膠速度設置的過快導致的。
Under normal circumstances, the problem of incomplete rubber beating is mostly caused by human factors. Of course, the reason is that the probability of occurrence is relatively low. First of all, let's say what the human cause is. One of the cases is that we set the sizing speed of the glue machine too fast.
有的客戶為了加快自己的生產節奏追趕生產計劃，將打膠速度認為調整的過快，導致膠體還沒有完全達到合格標準機頭就已經移動到下一個位置進行打膠操作了，如果我們需要加快打膠的速度調整了打膠機的移動參數的話，那么我們對應的也應該對供膠系統也進行相應的設置，比如這時候我們就需要加大供膠壓力，增大打膠機的出膠速度來配合對象的移動速度的增加。

Some customers in order to speed up its own rhythm of production after the production plan, the speed adjustment of the glue that is too fast, resulting in the colloid is still not fully meet the eligibility criteria of head has been moved to the next position of the glue operation, if the mobile parameter we need to accelerate the speed of adjustment of the glue glue machine. So, we should also carry out corresponding setting on the glue supply system, for example, this time we need to increase the glue supply pressure, increase the speed of glue machine glue to match the object's speed increase.
如果我們僅僅是單獨的增加了打膠機的移動速度而沒有對壓力進行調節的話就很有可能出現打膠不飽滿的情況發生。另外一種情況跟打膠機的速度差不多就是我們的供膠壓力不足導致的。產生打膠不飽滿的原因可以參考種情況。除了以上小編說的人為原因導致的這個故障以外設備的零部件損壞也會導致這個問題，比如機頭感應器損壞。
If we increase the speed of the glue machine alone instead of adjusting the pressure, it is very likely that we will not get enough glue. The other is about the speed of the rubber machine, which is caused by our lack of adhesive pressure. The reason why the glue is not full can be referred to the first situation. Damage to the parts of the equipment, such as the head inductor damage, can also be caused by the damage to the parts of the equipment other than the man-made causes mentioned above.
在我們的打膠機機頭有一個對鋁條深淺進行探測的感應器，如果發現鋁條過深或者過淺的時候他會自動的調整移動的移動速度以及供膠壓力（自動調整幅度是小范圍內的）。如果我們的鋁條本身就深淺不一，在加上我們的感情器損壞的壞就會發生這種情況！
At the head of our glue machine, there is an inductor to detect the depth of the aluminum strip. If it is found that the aluminum strip is too deep or too shallow, it will automatically adjust the moving speed and the pressure of glue supply (the automatic adjustment range is within a small range). If our aluminum strip itself the depth of our emotional damage in addition to the bad happen!
本文由雙組份打膠機友情奉獻.更多有關的知識請點擊:http://www.bjrcc.com.cn我們將用的技術.真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.
This article is a friendship contribution from two component glue making machine. Please click on more related knowledge: http://www.bjrcc.com.cn, we will use the most advanced technology and the most sincere attitude to provide you with the most comprehensive service. We will dedicate more related knowledge to you. Please look forward to it.