隨著科技的不斷發展，越來越多的人開始使用自動化設備來生產產品。尤其是在大型企業中，自動化生產線已經成為必不可少的一部分。

With the continuous development of technology, more and more people are starting to use automated equipment to produce products. Especially in large enterprises, automated production lines have become an essential part.

1：介紹全自動中空玻璃封膠線的原理

1: Introduction to the principle of fully automatic hollow glass sealing line

全自動中空玻璃封膠線的原理是通過連續的、大量的專用膠水來固定玻璃表面，使其達到密封效果。這種技術通常被用于生產電子元器件和集成電路等產品。使用不同顏色的膠粘劑來分別覆蓋玻璃表面的小孔或縫隙處，可以提高產品質量。在使用之前，需要對玻璃進行測試以確保正確安裝。這是因?yàn)椋喝绻z帶不能牢固地粘住任何東西，則將發生災難性故障；膠帶上殘留的水分會導致玻璃發霉；膠帶不平整也可能導致玻璃邊緣開裂。因此，必須按照一定規則進行操作以防止錯誤的操作造成的損失。

The principle of the fully automatic hollow glass sealing line is to fix the glass surface with a continuous and large amount of specialized glue to achieve a sealing effect. This technology is often used to produce products such as electronic components and integrated circuits. Using different colored adhesives to cover small holes or gaps on the glass surface can improve product quality. Before use, it is necessary to test the glass to ensure proper installation. This is because if the tape cannot firmly adhere to anything, a catastrophic failure will occur; The residual moisture on the tape can cause the glass to mold; Uneven tape may also cause cracks at the edges of the glass. Therefore, it is necessary to operate according to certain rules to prevent losses caused by incorrect operations.

2：分析全自動中空玻璃封膠線生產過程中存在的問題

2: Analyze the problems in the production process of fully automatic hollow glass sealing line

全自動中空玻璃封膠線生產過程中存在的問題主要有：1.自動化程度不高，人力成本較高；2.產品質量較差，可靠性低；3.需要人工檢查試機，工作效率低下。針對以上這些問題，建議采用以下措施來解決：1.首先要提高自動化水平，以降低人力成本；2.其次對產品質量進行嚴格把關，確保可靠、穩定；3.后在試機時要求工人認真對待，盡量避免漏檢或誤判等情況發生。

The main problems in the production process of fully automatic hollow glass sealing line are: 1. Low level of automation and high labor costs; 2. Poor product quality and low reliability; 3. Manual inspection and testing are required, resulting in low work efficiency. To address these issues, it is recommended to take the following measures: 1. Firstly, improve the level of automation to reduce labor costs; Secondly, strict quality control should be implemented to ensure reliability and stability of the product; 3. During the machine testing, workers are required to take it seriously and try to avoid situations such as missed inspections or misjudgments.

3: 后對全自動中空玻璃封膠進行總結

3: Summarize the automatic sealing of hollow glass later on

隨著科技的進步，越來越多的企業開始使用全自動中空玻璃封膠。這種技術可以有效地防止玻璃破裂或損壞，并且還能夠提高生產效率和質量。雖然目前已經有很多企業使用了這項技術，但是在應用過程中還是存在一些問題。首先，許多人認為全自動中空玻璃封膠是一種昂貴的設備，這是因?yàn)樗枰厥獾牟牧蟻碇谱鳌Ｆ浯危捎谶@個行業涉及到復雜的專業知識，沒有受過專業訓練的人員很難掌握。后，人們也不知道該如何正確安裝和維護這些機器。

With the advancement of technology, more and more enterprises are starting to use fully automatic hollow glass sealing adhesive. This technology can effectively prevent glass breakage or damage, and also improve production efficiency and quality. Although many enterprises have already used this technology, there are still some problems in the application process. Firstly, many people believe that fully automatic sealing of insulating glass is an expensive equipment because it requires special materials for production. Secondly, due to the complex professional knowledge involved in this industry, it is difficult for personnel without professional training to master it. Later, people also did not know how to properly install and maintain these machines.

以上的文章由山東昌盛數控設備有限公司中空玻璃加工設備提供分享，更多內容請關注我們：http://www.bjrcc.com.cn

The above article is provided and shared by Shandong Changsheng CNC Equipment Co., Ltd. for hollow glass processing equipment. For more content, please follow us: http://www.bjrcc.com.cn