中空打膠機在使用的時候一般按照膠水的性能能夠劃分為單組份中空玻璃打膠機和雙組份中空玻璃打膠機，我們先來說說看單租份打膠機，這一種打膠機是比較簡單的一種設備，使用的過程中相對簡單，只需要使用一個壓盤將膠水抽出來到一定的分量然后打進產品里面就可以了。
The hollow sealant dispenser can generally be divided into single component hollow glass sealant dispenser and two-component hollow glass sealant dispenser according to the performance of the glue. Let's talk about the single rent sealant dispenser. This kind of sealant dispenser is a relatively simple device. It is relatively simple in the use process. You only need to use a pressure plate to pump the glue to a certain amount and then drive it into the product.

還有一種是雙組份打膠機，這個原理和我們知道的雙液點膠機是差不多的，在進行工作的時候可以按照客戶的要求量身定制壓盤，壓盤需要兩個，然后將已經準備好的膠桶放在兩個定制的壓盤下面，而且經過壓盤壓膠以后在使用定量泵進行配比和混合，全部完成了以后在將膠打入到產品里面。
The other is two-component glue dispenser, which is similar to the two-component glue dispenser we know. When working, you can customize the pressure plates according to the customer's requirements. You need two pressure plates. Then put the prepared glue bucket under the two customized pressure plates. After the pressure plate is pressed, you can use a quantitative pump to mix and mix the glue. After all of them are completed, you can inject the glue into the product.
現在在市場上面的中空玻璃打膠機一般都是采用多的活塞式打膠的方式，因為活塞式打膠的話是有一個抽膠的過程的，但是也經常會因為操作的不準確性導致中空玻璃打膠機打膠的線條變得不均勻，容易出現忽大忽小的狀態，所以經過了發展和研究以后，中空玻璃打膠機已經能夠連續打膠了，而且操作也是準了很多，而且打膠的線條也變得比較均勻了，基本上不會在出現忽大忽小的情況了，而且在進行配比的時候要按照使用的情況來進行配比，另外在操作的時候也少不了手持式打膠搶的幫助，也可以使用人工去操作。
Currently, the insulating glass sealant dispensers on the market generally use multiple piston type sealant application methods, because the piston type sealant application involves a process of sealant extraction, but also often leads to uneven sealant application lines of the insulating glass sealant dispenser due to inaccurate operation, which is prone to the state of large and small. Therefore, after development and research, the insulating glass sealant dispenser has been able to apply sealant continuously, Moreover, the operation is accurate, and the gluing line has become more uniform, which basically does not change from big to small. In addition, the matching should be carried out according to the use situation. In addition, the operation can also be carried out manually without the help of a hand-held glue dispenser.
以上就是為大家介紹的有關玻璃涂布機設備詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.bjrcc.com.cn
The above is a detailed introduction to the glass coater equipment. I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://www.bjrcc.com.cn